Toyota Tundra 3rd Gen K70 (2021-On) - Comp Shocks 2.5 IFP RR Suspension Lift Kit

Transform your stock Tundra K70 with our premium Comp Shocks suspension lift kit. Our shocks are custom valved in-house to perfectly match your exact vehicle setup. Widely regarded as the best aftermarket suspension upgrade for the Tundra’s, the large 2.5” Dia Body Comp Shocks system delivers significantly improved comfort and handling over the factory suspension. Whether you're daily driving, carrying heavy tools, or tackling the toughest outback tracks, our suspension systems have it covered.

 

We’ve Made Selecting the Right Kit Simple

Simply select the option in the drop-down menu that suits your setup, ranging from a stock front/rear end (no accessories) to a heavy combination of bar work and other accessories.

Comp Shocks are Built Tough

Engineered as the ultimate on and off-road shock system, our massive 2.5” diameter shock bodies paired with remote reservoirs hold significantly more oil than other replacements, offering premium shock cooling performance under all conditions for reduced shock absorber fade.

Dial In Your Ride with Compression Adjusters

Take complete control of your suspension with our precision compression adjusters on the remote reservoir canisters, allowing instant on car Damping adjustment for a perfectly dialled ride, no matter what you row at it.

Engineered for Heavy Loads and Towing

All of our shocks are custom valved in-house to suit your vehicle’s specific weight and intended use. Being hands-on with each shock we sell makes them the ultimate load carrying & towing suspension system for your Toyota Tundra K70, ensuring maximum stability, reduced sway, and unwavering safety under heavy strain.

Important Note on Ride Height Adjustment

We pre-set these struts close to your selected lift height. However, due to front-end weight variables (bullbars, winches, dual batteries), the struts often require readjustment to perfectly suit your specific application. Please note: The struts must be removed from the vehicle and a spring compressor used to access and adjust the locking nuts. These cannot be adjusted in the car.

Fully Rebuildable & Local Support

Unlike throwaway factory suspension parts, our Comp Shocks 2.5 series are fully rebuildable and tuneable offering a lifetime of value. Our Comp Shocks are fully serviceable onsite at our Sunshine Coast facility, backed by an authorised agent network in Brisbane and Melbourne.

 

Optional Rough Country Forged Upper Control Arms

Lifting your 3rd Gen Tundra alters the factory suspension geometry. We highly recommend selecting the optional Rough Country Upper Control Arms from the drop-down menu to correct caster and camber, ensuring proper wheel alignment and maximising tyre life.

Optional Diff Drop Kit

Lifting your Tundra alters the factory CV joint operating angles, which can lead to premature CV boot wear or joint binding. We highly recommend selecting the optional diff drop kit from the drop-down menu to properly lower the front differential and restore safe CV geometry.

Optional Adjustable Rear Panhard Rod

Lifting the rear of your Tundra alters the factory suspension geometry, causing the solid rear axle to physically shift off-center to one side. We highly recommend selecting the optional Adjustable Rear Panhard Rod from the drop-down menu to correct this lateral shift.

Optional Adjustable Rear Upper and Lower Control Arms

Lifting the rear of your Tundra rotates the rear axle, which can introduce driveline vibrations and reduce tyre clearance. We highly recommend selecting the optional Adjustable Rear Upper and Lower Control Arms from the drop-down menu to reposition the axle back to its factory center to maximise wheel clearance and restore optimal suspension geometry.

Optional Load Assist Airbags

For ultimate load carrying support, we offer the BOSS Airbag Kit as an optional upgrade for your Tundra K70. These proven, heavy-duty airbags allow you to perfectly level your ride height under maximum payload, ensuring safe and stable towing alongside your new Comp Shocks suspension system. Click here for more product information.

 

Note: i-FORCE MAX Hybrid Models

Please note that due to the increased front-end weight of the electric motor and hybrid components, Tundra models equipped with the i-FORCE MAX hybrid powertrain will typically sit 20mm to 40mm lower in the front than the listed lift height. If you are fitting this kit to a hybrid model, additional pre-load adjustment may be required during installation to achieve your desired level stance.

 

Key Features & Benefits

• Compression Adjusters: Dial your ride comfort from soft to firm instantly.
• Massive 2.5" Shock Bodies & Remote Reservoir Canisters: Increased oil capacity for superior cooling and reduced shock fade.
• Custom Valving: Expertly tuned in-house to manage heavy loads, towing, & touring.
• Fully Rebuildable & Tuneable: Lifetime reliability with suspension servicing options on the Sunshine Coast, Brisbane, and Melbourne.

Kit Includes:

• 1 x Pair of Assembled Comp Shocks 2.5 Front Struts (Remote Reservoir Adjustable)
• 1 x Pair of Rear Comp Shocks 2.5 Shocks (Remote Reservoir Adjustable)
• 1 x Front and Rear Canister Mount Kit

Note: Rear coil springs, control arms, and airbags are optional extras and must be selected via the drop-down menus prior to checkout.

To Suit:

• Toyota Tundra K70 Coil Rear (2021-Current) NOTE: Please contact us if your vehicle falls outside this year range to confirm fitment.